Institute for Neutron Physics and Reactor Technology (INR)

AMTEC

 

The Alkali-Metal Thermal to Electric Converter (AMTEC) is a device for direct transformation of heat into electric energy. Most of them developed up to date, use sodium. Their key component is a beta”-alumina solid electrolyte (BASE). As a special feature of this ceramic, sodium ions can hop through its crystal structure so that it is permeable for sodium ions, but it is an isolator for electrons and neutral sodium atoms.

 

In an AMTEC cell, the BASE separates the cell in two regions, both filled with sodium. One of them is heated – for example by solar power – up to a temperature range of ~600-1000 °C. The other region is cooled below a temperature of ~ 400 °C. In the high temperature region, sodium ionizes at the anode of the cell. The electrons are collected at the anode and directed to the cathode on the cold side of the BASE via an external load, where the produced electricity can be quantified. At the cathode, the recombination with the sodium ions transported through the BASE occurs and molecular sodium in vapour state is formed. The sodium is condensed and transported back to the hot side so that the cycle can restart. As a thermodynamic cycle, it corresponds nearly to an isothermal expansion of sodium between the two pressures on either side of the BASE. The theoretical value for conversion efficiency is about 40 %; however, presently ~ 20–25 % has been reached.

 

AMTEC has several advantages, such as a larger efficiency comparative to other direct converters, a large power-to-weight ratio, it is silent in operation and quasi maintenance free since no moving components are necessary. For commercial applications and increased performance, a modular assembly can be developed.

Though the principle of this converter exists since the 1960s, several issues are still open. The related experimental research in our institute aims at the development of improved designs for AMTEC cells to assess its usage in a concentrating solar power (CSP) plant as a topping system, increasing therefore the global efficiency of the plant. It addresses issues as material investigations, improvements, and development, studies of different metal-ceramic interfaces, a characterization of the BASE stability and improvement for long term operation, extension of the operational life time, as well as the increase of the efficiency of the AMTEC conversion process.

The studies benefit from our in-house experimental experience of about 10 years, a period in which several AMTEC prototypes were tested in our institute. Recently, studies were performed in the frame of the HGF LIMTECH (LIquid MEtal TECHnology) and HGF HEMCP (Helmholtz Energy Materials Characterization Platform) projects, in close collaboration with other institutes within KIT.